Schematic separation only. Clip flexibility and assembly forces are not simulated.
The counterpart sits at the CAD seat: corner on the groove floor (−0.576 mm along the arm), tail against the lips (+0.326 mm). Slider 0–60 % covers the last 5 mm of the insertion.
Display only. Seat and bump clearance come from the rigid CAD insertion sweep; the beam is drawn as a rigid rotation about its root (no FEM, no forces). Orange = retention contact (bump flank / pocket wall). Exaggerated scales open a gap at the contact that does not exist. The uncut print tab is shown and stretches with the beam.