Optional Mod Matrix¶
Published: 31 Aug 2026
This note is the feature index for optional Flashforge Creator 5 and Creator 5 Pro modifications, consolidated on 2026-08-27. It is a routing page rather than a second installation manual. Each feature owns its detailed status in a linked note, and repository labels are not treated as physical validation.
Feature status¶
| Feature | Detail page | Source status | Current boundary |
|---|---|---|---|
| Camera at 1280x720 | Camera and Remote Screen | C1/R1 | Not physically validated in this refactor |
| Creator 5 Pro remote screen | Camera and Remote Screen | R1 | Repository reports firmware 1.9.6 test; ports must stay private |
| Entware | Entware Moonraker and Mainsail Updates | C1/R1 | Experimental; depends on legacy NaN path |
| Moonraker update | Entware Moonraker and Mainsail Updates | C1/R1 | Old recipe; current upstream install not established |
| Mainsail replacement | Entware Moonraker and Mainsail Updates | C1 | Old release URL is historical |
| SSH host-key persistence | SSH Host Key Persistence | C1 | Persistent system change; backup first |
| Heat/fan decoupling | Heat and Fan Routing | C1 | Macro is not a validated safety configuration |
| Adaptive mesh and print metadata | Print Workflow Adaptive Mesh and OrcaSlicer | C1 | Firmware, log, and slicer interactions remain open |
| Flow calibration | Print Workflow Adaptive Mesh and OrcaSlicer | R1 | OrcaSlicer PR #14933 was open at the recorded check |
| Open firmware | Open Firmware Migration | S1/I1/R1 | Research roadmap; no stock-free operation claim |
Selection rule¶
Start with the baseline in Modding Baseline - Root Loop and Mainsail. Select one optional feature at a time, preserve a rollback, and record the exact firmware, board, source revision, and physical result. A feature marked experimental or INDEV is not an approval.